Wishlist Cart 0

Size Guide

From a test card to a full kitchen. Measure before you order: the steps are below.

Sizes

Which Size Should You Choose?

The areas shown are calculated from the coverage and number of coats set in the theme. They give a rough idea, not a guarantee.

Sample

Coverage
About 1 m²
Good for
Trying a colour

Enough to paint two or three cards and move them around the room for a week before choosing.

500 ml

Coverage
About 3 m²
Good for
A small piece of furniture

A chair, a nightstand, a frame. The size for projects that fit on a table.

1 L

Coverage
About 6 m²
Good for
A whole piece of furniture

A dresser, a bookcase, a cabinet door. The most frequently ordered size.

4 L

Coverage
About 22 m²
Good for
A kitchen, or several pieces of furniture

When the same colour is used on several pieces. A single tint batch, so no variation from one piece to the next.

Figures assume 11 m² per litre and 2 coats on a smooth, previously painted surface.

An estimate. Porous, textured or strongly contrasting surfaces absorb more — buy a little over rather than risk a second batch in a different tint lot.

Porous, textured or high-contrast surfaces absorb more. Between two sizes, take the larger one: a second tint batch will never be exactly identical to the first.

Three Minutes

How to Measure Before You Order

  1. Step 1

    Measure Surface by Surface

    Length × height, for each surface. On a piece of furniture, count the sides, the top, the doors and the drawers separately: it takes longer to write down and is much more accurate than an overall estimate.

    Tip: Don’t deduct handles or small mouldings. The paint they save is the paint you lose to the brush.

  2. Step 2

    Add It Up, Then Count the Coats

    Add up your surfaces, then multiply by the number of coats. Two coats is the norm on a clean, previously painted surface.

    Tip: A pale colour over a dark base almost always needs one more coat.

  3. Step 3

    Take the Next Size Up

    Compare your total with the chart above and choose the next size up. What’s left over is for touch-ups, and it comes from the same tint batch as the rest of the piece.

Frequently Asked Questions

Before You Order

  • How Many Coats Do I Need?

    Two, in most cases, on a clean, degreased surface. Bare wood, a dark base under a pale colour or a very bright pigment often need a third.

  • Can I Mix Two Cans of the Same Colour?

    Yes, and it’s even recommended when they come from different batches: pour them together into a bucket before you start, rather than switching cans in the middle of a door.

  • I Have Some Left Over. Will It Keep?

    Seal the container tightly and store it upright, away from frost. Write the room and the date on the lid: that’s exactly what you’ll be looking for two years later for a touch-up.

  • I Haven’t Settled on the Colour Yet.

    Start with samples. They’re painted on a card you move around the room, morning and evening — something no screen can replace.

Colour First, Size Second

A painted card, placed on the piece in question, settles the question of size at the same time as the question of colour.

Order Samples